Aluminium alloy L160 – 7075 is a very high strength alloy.
The standard specifying this grade has been superseded by BSEN 2127.
Alloy Designations
Aluminium alloy L160 has similarities to the following standard designations and specifications: 7075
Temper Types
The most common temper for L160 – 7075 aluminium is:
- T7351 - Solution heat treatment then specially artifically aged for resistance to stress corrosion.
Mechanical Properties
These Mechanical properties are for Bar in the T73511 temper
| Up to & incl. 10 | 400 | 470 | 7 |
| Over 10 up to & incl. 20 | 420 | 485 | 8 |
| Over 20 up to & incl. 50 | 415 | 485 | 8 |
| Over 50 up to & incl. 75 | 410 | 475 | 8 |
| Over 75 up to & incl. 100 | 380 | 450 | 7 |
| Over 100 up to & incl. 150 | 365 | 425 | 7 |
This Data is indicative only and must not be seen as a substitute for the full specification from which it is drawn. In particular, the mechanical property requirements vary widely with temper, product and product dimensions. The information is based on our present knowledge and is given in good faith. However, no liability will be accepted by the Company is respect of any action taken by any third party in reliance thereon.
As the products detailed may be used for a wide variety of purposes and as the Company has no control over their use; the Company specifically excludes all conditions or warranties expressed or implied by statute or otherwise as to dimensions, properties and/or fitness for any particular purpose.
Any advice given by the Company to any third party is given for that party’s assistance only and without liability on the part of the Company. Any contract between the Company and a customer will be subject to the Company’s Conditions of Sale. The extent of the Company’s liabilities to any customer is clearly set out in those Conditions; a copy of which is available on request.